Home Monitoring Camera Port Setup - LG N1A1DD1 User Manual

Home Monitoring Camera Port Setup

In order to access the installed USB camera in the internal network router from
an external network router, you must set port forwarding on the camera from the
router's setup menu.
※ IP in the figure below is an example to facilitate your understanding.
- Set IP and port when accessing a camera in the internal network(LAN) of the router.
WAN IP:10.177.192.69
1) Camera setting value on home Monitoring web menu
USB Camera 1
Port: 9080(Use a value automatically assigned)
(Encouraged: 9080 ~ 9089)
2) Set up a router
※ This is an example of how to set a port forward for a router.
Name Internal IP
USB Camera 1 192.168.0.25 tcp
USB Camera 1 : Because, the USB camera is connected to Network Storage,
e.g.) Connect to http://10.177.192.69:9080 from an external network -> Automatically
connect to internal network http://192.168.0.25:9080.
Protocol
it is using the same IP address as the Network Storage.
Therefore, the internal port number must use a different port number
than the number 80 port, which the Network Storage is using.
That is, you should use the port number that is automatically
100
External Port Internal Port
9080-9080 9080-9080
set.