Using Monitor out Function
* You can select either of the two RGB inputs.
1. Press the MENU button and then use
2. Press the
button to select
,
3. Press the
button to select
,
G
Press the MENU button twice or the EXIT button to exit the menu screen.
Checking lamp time
1. Press the MENU button and then use
2. The used lamp time is displayed.
G
When projector lamp is reaching the end of its life, the lamp indicator will turn red.
(Refer to the page 10.)
G
The lamp warning LED illuminates red continuously in the case of excessive lamp
time.
G
Press the MENU button twice or the EXIT button to exit the menu screen.
Using Still Function
1. Press the STILL button of remote control.
* You can freeze the input image.
<Moving Image>
2. To exit STILL, press any button .
* The STILL function will release automatically after approximately 10 minutes.
button to select the
,
item.
or
.
button to select the
,
<Still Image>
Keystone
menu.
Blank Image
Captured Image
Lamp mode
Monitor Out
Lamp time
MENU
Prev.
menu.
Keystone
Blank Image
Captured Image
Lamp mode
Monitor Out
Lamp time
MENU
Exit
Function
Black
High bright
RGB1
11 Hr
Move
Select
Black
High bright
RGB1
11 Hr
Move
OK
29