Starting And Shutting Down The Projector - LG BS254 User Manual

Starting and Shutting down the Projector

1.
Connect the power cord to the projector.
Connect the other end to a wall outlet.
The POWER LED on the projector
lights.
2.
Turn on the connected devices.
3.
Then press the
turn on the projector.
The projector splash screen displays and
connected devices are detected.
See Setting an Access Password
(Security Lock) on page 12 if security
lock is enabled.
4.
If more than one input device is con-
nected, press the SOURCE button and
use ▲▼ to scroll among devices.
(Component is supported through the
RGB to COMPONENT ADAPTER.)
5.
When the "Power Off? /Press Power
again" message appears, press the
POWER button. The projector turns off.
Caution:
1. Be sure to remove the lens cap before starting projector.
2. Do not unplug the power cord until the POWER LED stops flashing–indicating the projector has
cooled down.
POWER button to
D
D
D
RGB: Analog RGB
•
Component: DVD input YCbCr / YPbPr, or
HDTV input YPbPr via HD15 connector
Composite Video: Traditional composite video
•
S-Video: Super video (Y/C separated)
•
– 11 –
L P P r o j e c t o r – U s e
L P P r o j e c t o r – U s e
L P P r o j e c t o r – U s e
r ' s M a n u a l
r ' s M a n u a l
r ' s M a n u a l