Table of Contents
Advertisement
14
1.
Turn off the power switch in the rear
of the unit.
2.
Unplug the unit and let it cool completely.
3.
To keep the heater clean, the outer
shell may be cleaned with a soft, damp
cloth. You may use a mild detergent if
necessary. After cleaning, dry the unit
with a soft cloth. CAUTION: DO NOT
let liquid enter the heater.
4.
DO NOT use alcohol, gasoline, abrasive
powders, furniture polish, or rough
brushes to clean the heater. This may
cause damage or deterioration to the
surface of the heater.
5.
DO NOT immerse the heater in water.
6.
Wait until the unit is completely dry
before use.
7.
Air filter should be cleaned after 3
months use, when it appears dirty or
looks like it is blocking airflow. With
heater unplugged, remove 2 assembly
screws as illustrated below. With filter
assembly removed, clean all parts of
filter assembly. Allow parts to completely
dry before reinstalling onto the heater.
1.
Unit with Filter
2.
Air Filter
3.
Filter Bracket
4.
Remove Bracket Screws with Screwdriver
1
2
8.
Reassemble filter and then attach to
heater. WARNING: Do not use heater
without filter assembly in place or
with a filter that is not completely dry.
9.
If you don't plan to use the unit for a
long time, take out the battery of the
remote control using the following
steps.
To replace remote control battery,
insert 1 pc CR2025 battery.
1
2
PULL
PUSH
1.
Remote Control
2.
Battery Cover
3.
Battery
4
3
3
Hide quick links:
Advertisement
Table of Contents
