Installation And Configuration - Sealey SeaLINK+232 User Manual

INSTALLATION AND CONFIGURATION

Software Installation
Windows 98/ME/2000/XP/Vista™ Operating Systems
1. Begin by locating, selecting, and installing the correct software from the Sealevel software driver
database.
2. Select the Part Number (2101) for your device from the listing.
3. Click the 'Install Drivers' button.
4. The setup file will automatically detect the operating environment and install the proper
components. Follow the information presented on the installation screens that follow.
5. A screen may appear with the declaration: "The publisher cannot be determined due to the
problems below: Authenticode signature not found." Please select the 'Yes' button and proceed
with the installation. This declaration simply means that the Operating System is not aware of the
driver being loaded. It will not cause any harm to your system.
6. During setup, you may specify installation directories and other preferred configurations. This
program also adds entries to the system registry that are necessary for specifying the operating
parameters for each driver. An uninstall option is included to remove the driver and all registry/INI
file entries from your system.
To confirm that the SeaCOM driver has been successfully installed, click on the 'Start' button, and then
select 'All Programs'. You should see the 'SeaCOM' program folder listed.
You are now ready to proceed with connecting the 2101 to your system. Refer to the Hardware Installation
section for details.
Windows NT is not USB aware and thus cannot support this
device.
© Sealevel Systems, Inc. 2101 Manual | SL9089 8/2021
5