Appendix E - Compliance Notes - Sealey SeaLINK+232 User Manual

APPENDIX E - COMPLIANCE NOTICES
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in such case the user will be required to correct the
interference at the user's expense.
EMC Directive Statement
Products bearing the CE Label fulfill the requirements of the EMC directive (89/336/EEC)
and of the low-voltage directive (73/23/EEC) issued by the European Commission. To obey
these directives, the following European standards must be met:
This is a Class A Product. In a domestic environment, this product may cause radio interference in
which case the user may be required to take adequate measures to prevent or correct the
interference.
Always use cabling provided with this product if possible. If no cable is provided or if an alternate
cable is required, use high quality shielded cabling to maintain compliance with FCC/EMC
directives.
© Sealevel Systems, Inc.
EN55022 Class A - "Limits and methods of measurement of radio interference
•
characteristics of information technology equipment"
EN55024 – "Information technology equipment Immunity characteristics Limits
•
and methods of measurement".
2101 Manual | SL9089 8/2021
13