Orientation; Front And Rear Views - Kenwood TK-868GD User Manual

FRONT AND REAR VIEWS

(Power) switach
Press to switch the transceiver ON or OFF.
/ keys
Press to activate their programmable functions.
Display
Refer to page 9.
/ keys
Press to activate their programmable functions.
TX/RX Indicator
Lights red while transmitting. Lights green while receiving a signal. Flashes
orange when receiving an optional signaling call.
Microphone jack
Insert the microphone plug into this jack.
Status Indicator
Lights during a specifi ed mode, based on dealer programming.
S / A / <B / C> /
Press to activate their programmable functions.
Speaker
Internal speaker.
PTT switch
Press this switch, then speak into the microphone to call a station.
Antenna connector
Connect the antenna to this connector.
ACC connector
Connect the ACC to this connector.
Optional cable, KCT-60 is available except for TK-868GD.
• Do not connect KCT-60 to ACC connector on TK-868GD, because the pin
assignments of ACC connector on TK-868GD does not support KCT-60 use.
8

ORIENTATION

keys
ACC.