Samsung ST100 Quick Start Manual page 62

Using the timer
Using the motion timer
1
In Shooting mode, select
2
Press [ Shutter].
3
Stand within 3 m from the camera within 6 seconds after
pressing [Shutter].
4
Make a motion, such as waving your arms, to activate
the timer.
The AF-assist light/timer lamp will start to blink rapidly when
•
the camera detects you.
The detection range of
the motion timer
.
Shooting options
5
Pose for your photo while the AF-assist light/timer lamp
is blinking.
The AF-assist light/timer lamp will stop blinking just before the
•
camera automatically takes a photo.
The motion timer may not work when:
•
You are more than 3 m away from the camera.
•
Your movements are too subtle.
•
There is too much light or backlight.
• The subject is close enough to reflect the AF light.
49