LG W2286L-PF User Manual page 25

On Screen Display(OSD) Selection and Adjustment
Main menu
SETUP
D-SUB input
HDMI input
MENU : Exit
: Adjust
: Adjust
SET : Select another
sub-menu
NOTE
If this does not improve the screen image, restore the factory default settings. If necessary, execute the
white balance function again. This function will be enabled only when the input is a D-SUB input.
Sub menu
LANGUAGE To choose the language in which the control
names are displayed.
OSD To adjust position of the OSD window on the
screen.
POSITION
WHITE If the output of the video card is different the
BALANCE required specifications, the color level may
deteriorate due to video signal distortion. Using
this function, the signal level is adjusted to fit into
the standard output level of the video card in
order to provide the optimal image.
Activate this function when white and black colors
are present in the screen. (Only for D-SUB input)
It is the function to filter out the noise which may
OVERSCAN
be generated around the edge of the image when
connecting the HDMI and the external device.
When it is set to ON, the original image is
enlarged with no noise.
When it is set to OFF, the original size is displayed
as it is regardless the noise. (Only for HDMI input)
R T C If you set ON, you enable the Response Time
Control function and reduce the afterimage of the
screen.
If you set OFF, you disenable the Response
Time Control function and operate at panel
response time. (Only W2286L)
POWER Use this function to set the power indicator on the
front side of the monitor to ON or OFF.
INDICATOR
If you set OFF, it will go off.
If you set ON at any time, the power indicator will
automatically be turned on.
FACTORY
Restore all factory default settings except
"LANGUAGE."
RESET
Press the
24
Description
, buttons to reset immediately.