Samsung QN8 A Series E-Manual page 109

Tuning broadcast signals manually
Settings Broadcasting
You can scan for all the channels manually and store the scanned channels in the TV.
This function may not be supported depending on the model or geographical area.
Tuning digital channels
Settings Broadcasting
Select New, and then configure Channel,
and store a list of digital channels in the TV.
Tuning analogue channels
Settings Broadcasting
Select New and configure Programme,
channels. Then, select Store
This function is only available for analogue broadcasts.
Channel mode
• P (pogramme mode)
When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from
P0 to P99. You can select a channel by entering the position number in this mode.
• C (aerial channel mode) /
These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting
station or cable channel.
Expert Settings
Expert Settings
Frequency
Expert Settings
Colour System,
to store the scanned channels in the TV.
S (cable channel mode)
Manual Scan
Manual Scan
and Bandwidth, and then select
Manual Scan
Sound System, Channel
- 109 -
Try Now
Digital Channel Tuning
Search to automatically scan
Analogue Channel Tuning
and Search to scan for analogue