Display image is incorrect
The screen color is
mono or abnormal.
The screen blinks.
Have you installed the display driver?
Have you installed
the display driver?
Do you see an
Plug&Play (VESA DDC)
• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
•Make sure the video card is properly inserted in
•Set the color setting higher than 24 bits (true color)
at Control Panel -Settings .
• Check if the screen is set to interlace mode and if
yes,change it to the recommend resolution.
Be sure to install the display driver from the display
driver CD (or diskette)that comes with your
display.Or,you can also download the driver from
our web site:http://www.lge.com.
Make sure to check if the video card supports