Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Focal Meditech Dowing2
Summary of Contents for Focal Meditech Dowing2
- Page 1 Dowing User manual ID manual: 606281 Revision: 1.0.0 Date: 1 May 2020...
-
Page 2: Table Of Contents
Disclaimer Content The content of this manual is for informational use only and is subject to change without notice. Focal Meditech BV assumes no responsibility or liability for any errors or inaccuracies Disclaimer that may appear in this document. Copyright Notice Periodically, changes may be made to the information in this manual;... -
Page 3: Manual Introduction
This is the user manual for Dowing , a dynamic arm support system. This product is developed, Appendix 6 Conditions and Warranty manufactured and distributed by Focal Meditech B.V. or one of its authorized representatives. Conditions and Warranty: Dowing supplied through a representative of Focal Meditech... -
Page 4: Symbol Explanation
Symbol explanation Certification Notices Symbols used in this manual This is a CE Class I medical device This symbol in combination with the word “Danger” is used when there is Do not remove this label. If the label is removed, the warranty will be void. important information which can help you avoid the risk of an equipment failure This label is positioned at the bottom side of Dowing and serious personal injury or death. -
Page 5: Safety Notices
Internet: www.focalmeditech.nl Warning: In case of faulty device contact Focal Meditech. Do not try to fix it yourself. Failure of this will void the warranty. Warning: In case of doubt about safety of the device contact Focal Meditech. Warning: In case of a serious incident when using the device, contact Focal Meditech... -
Page 6: Intended Use And Operation Of The Device
Intended use and operation of the device The user of Dowing can use this device in various environments like home, workplace, school or institutional setting. A restricted tolerance of environmental humidity exists. Intended use Dowing can be mounted on a table or working chair. Due to safety and functional reasons, Dowing is a dynamic arm support. -
Page 7: Technical Information
Warning: Dowing is before all intended to be used by persons challenged by limited Technical information muscle force in their arms and shoulder girdle. Due to diminished use of their musculoskeletal functions prior to the supply of Dowing and also due to the limited ability to stabilise and control joints, the risk of initial overburden is present. -
Page 8: Adjusting The Arm Fitting And Elbow Fitting
• At the top of Dowing there are two eject knobs. Pressing these two towards each other makes it possible to remove the human interface, containing the loadarm, arm fitting, elbow fitting and wrist support. • Body of Dowing . The body of Dowing contains: the balancing system including the possibility to adjust the balancing force. -
Page 9: Disconnecting The Human Interface
STEP 3: Replacing the human interface can be done by pushing the human interface into the body of Dowing2. The buttons do not have to be pushed. When the lever is in position, it cannot be removed without pressing the buttons. -
Page 10: Attach Or Detach Dowing 2
Attach or detach Dowing Controls If Dowing is not used for a long time it is recommended to detach the Dowing from its bracket. This will provide a safe situation for both Dowing and its surrounding. There are no electrical / software controls available for Dowing Hand position 1 Hand position 2 Detach Dowing... -
Page 11: Accessories
Accessories Mounting instructions There are no accessories available for Dowing In order to make stable and safe use of Dowing , there are two options available to mount Dowing . The way to attach those mounting options is explained in this chapter. Warning: Due to safety and functional reasons, Dowing should not be mounted on a (electric) wheelchair. -
Page 12: Installing The Chair / Stand Mount
Installing the chair / stand mount When a Dowing needs to be mounted on a working chair or stand the Dowing should be mounted on the chair/stand mount. Setscrews to fixate the Chair/ Stand mount For setting the orientation of this angle the complete rotation head upper and lower half should be turned together to the desired orientation. -
Page 13: Maintenance Instructions
Reuse • Horizontal rotation unlimited [º] To reuse Dowing , it must be disassembled and reviewed by Focal Meditech or an authorized Balance mass professional that is approved by Focal Meditech. Dowing must intensively be cleaned and • Up/Down inspected. The plastic parts of the buttons can be removed and replaced by new button parts. -
Page 14: Dowing
Dowing dimensions (human interface excluded) Dimensions loadarm Large (right handed version) Dimensions of the Dowing are variable. This is because it is a device with moving parts and different configurations. All dimensions are given in [mm] millimetres. 72.00 Dimensions loadarm X-Large (right handed version) Dimensions Table clamp and Chair / Stand mount... -
Page 15: Dowing 2 Content Of Case
Dowing content of case Appendix 2 Part numbers Swivel arms Body Dowing Place for screws Article number Description 600817 Dowing Start kit 603194 Table clamp left/right Table clamp 600600 Chair/stand mount left/right Chair / 601826 Loadarm with arm swing left (Large) stand clamp 601830 Loadarm with arm swing right (Large) -
Page 16: Appendix 3 Used Materials
603123 Arm fitting size 4 right Appendix 3 Used materials 603125 Arm fitting size 5 left 603126 Arm fitting size 5 right Article number Description Material(s) 600817 Dowing Start kit Aluminium 6082T6 + stainless 605658 Inlay arm fitting size 1 left steel (AISI 304) + steel 603194 Table clamp left/right... -
Page 17: Appendix 4 Quick Start Guide
603109 Arm fitting size 1 left Aluminium 6082T6 + Vikureen Appendix 4 Quick Start Guide (PS)+Velcro 603111 Arm fitting size 1 right 603113 Arm fitting size 2 left 603115 Arm fitting size 2 right 603117 Arm fitting size 3 left 603119 Arm fitting size 3 right 603121... - Page 18 Ontkoppel knoppen This product is developed, manufactured and potentially distributed by Body / Romp Focal Meditech B.V. This quick start guide contains the basic information Loadarm / Draagarm regarding Dowing . The aim of this information is to ensure successful, safe and effective use of the device.
- Page 19 Waarschuwing: Neem indien het apparaat onjuist functioneert Danger: Prevent direct contact with water or any other liquid. direct contact op met Focal Meditech. Probeer het niet zelf te Failure of this can lead to malfunctioning of device or bodily harm.
- Page 20 Parkeer Dowing Park or start using Dowing Plaats de human interface met de borgring achterwaarts over de Parkeer of start gebruik Dowing STAP 1: parkeerhaak. Beweeg de human interface omhoog totdat de balans van de human STAP 2: If Dowing is not used for a short time it is recommended to place the interface minder wordt.
- Page 21 Replacing the human interface can be done by pushing the Human Detach Dowing Interface into the body of Dowing2. The buttons do not have to be pushed. When the lever is in position, it cannot be removed without pressing the...
- Page 22 Hold with one hand the body of Dowing ; with the other hand, lift up STEP 5: in a straight line the lower swivel arm from the clamp Store Dowing in its case. STEP 6: Dowing loskoppelen Vergrendel Dowing in de vergrendelingshaak (zie parkeer of start STAP 1: gebruik Dowing Verwijder de arm uit de armschaal.
- Page 23 Adjust the balancing force / Aanpassen balanceerkracht Contact information / Contact informatie Dowing is manufactured and sold by: Dowing wordt gefabriceerd en verkocht door: Focal Meditech BV Droogdokkeneiland 19 5026 SP Tilburg Netherlands Figure 7: Adjust the balancing force Tel.:...
-
Page 24: Appendix 5 Declaration Of Conformity
Appendix 5 Declaration of conformity... -
Page 25: Appendix 6 Conditions And Warranty
Conditions and Warranty: direct supply by Focal Meditech BV to consumers In the case of direct supply by Focal Meditech BV to end users, Conditions and Warranty are subject to the Consumer General Terms and Conditions issued by Koninklijke Metaalunie and in...