Windows Ce Installation Guide - l-com RS-422 User Manual

USB to RS-422 / RS-485 Adapter

Windows CE Installation Guide

Download the latest available drivers for the required processor model from the FTDI website and unzip them,
the critical files in the driver package are:
ftdi_ser.dll - the VCP driver file
FTDIPORT.inf - user changeable file to allow devices with custom VID and PID combinations to be installed
Copy all of the unzipped files to the \\Windows directory on the PDA.
If the PDA requires a host adaptor (e.g. USB host cable, presentation pack or Compact Flash host card),
make sure that it is connected and installed before proceeding.
Connect the FTDI device to a host USB port on the PDA. This will provide a dialog box to direct Windows CE
to the driver files.
Type the full name of the VCP driver file into the dialog box as shown below. If the file name is incorrect, the
driver will not be found and the device will not function.
The device installation is now complete. The installation may be verified using the test program available
form the Utilities page of the FTDI website.
30