Advertisement
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (light on the
display will be flashing rapidly).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by long-pressing the Mode button
display begins flashing rapidly. Alternatively, turn off the power and restart the heater.
Add device through network
5.
Once registered, tap "+" in the upper right corner of the app's home page to add a
new device through the network.
6.
Select the product type from the list of options in the app (Heating & Cooling >
Heaters).
7.
Ensure that the device is in pairing mode, with the the light on the display flashing
rapidly, and tap "Confirm light is rapidly flashing".
for 5 seconds until the light on the
Advertisement
