System Requirements; Package Contents; About This Guide - OWC ENVOY PRO EX User Manual

INTRODUCTION

1.1 SYSTEM REQUIREMENTS

- Operating System
- Mac: macOS 10.12 or later
- PC: Windows 10 or later
- Hardware
- Mac or PC with a Thunderbolt 3 or USB-C port
- USB-C hosts with USB 3.1 Gen 1 will function normally but Thunderbolt
3 or USB 3.1 Gen 2 are recommended for best performance.
- NVMe M.2 SSD in 2280 form factor with M-key connector
- Not compatible with AHCI PCIe M.2 SSDs
- Not compatible with SATA M.2 SSDs

1.2 PACKAGE CONTENTS

OWC Envoy Pro EX
with USB-C

1.3 ABOUT THIS GUIDE

The instructions below are for customers who purchased the Envoy Pro EX with USB-C enclosure and need
to install their own NVMe M.2 SSD. This device requires an M.2 drive with a 2280 form factor. Please contact our
customer service team if you still have questions after reviewing the steps that follow.
1. Assembly requires a Torx T5 driver.
INTRODUCTION
USB 3.1 Gen 2 cable Screw packet¹ & Rubber feet
(Type-C to Type-C)
03