Table of Contents
Advertisement
Connecting the Display
Using the Computer
1.
Make sure to turn off the computer and product. Connect the cable as below sketch map
form
1
to
A
Connect Audio Cable
B
Connect Dsub Cable (PC)
C
Connect Dsub Cable (Mac)
Power Cord
2.
Insert the Cable Deco Cover in the Stand Body in the correct direction.
3.
Press
button on the front switch panel to turn the power on.
When monitor power is turned on, the 'Self Image Setting
Function' is executed automatically.
(Only Analog Mode)
NOTE
' Self Image Setting Function'?
This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function
automatically adjusts the display to optimal settings for individual input signals. If you want to adjust the monitor while in use, or wish to
manually run this function once again, push the 'AUTO/SET' button on the front panel of the monitor. Otherwise, you may execute the '
Factory reset' option on the OSD adjustment menu. However, be aware that this option initializes all the menu items except 'Language'.
2
.
Analog signal Audio signal
Wall-outlet type
PC-outlet type
(Connects to the *LINE OUT jack of the PC sound card.)
Mac adapter
For Apple Macintosh use, a separate plug adapter is needed to
change the 15 pin high density (3 row) D-sub VGA connector on
the supplied cable to a 15 pin 2 row connector.
A6
Headphone/Earphone Input
Automatically mutes the speaker
volume when the headphones are
plugged in.
Fix the power cord & signal cable
as shown in the picture.
Advertisement
Table of Contents
