Advertisement
Testing Reception (for Vibrations)
Test transmitter transmission and receiver reception
each time you change location of use.
Set channel switch on transmitter
to the same channel as receiver.
Place transmitter in room in which
you intend to use it. Rotate trans-
mitter power switch to turn
power on. Power indicator lights.
Turn on a radio.
Adjust
Channel
Vibrations Button
Power
Indicator
Power
Switch
Adjust
Channel
Power
Indicator
Clip receiver to your clothing (where
you will feel vibrations). Walk to
the furthest point of use. Rotate
power/volume dial to turn power
on. Power indicator lights. Now, press
the vibrations button. Vibrations
ready indicator lights.
Hint: You can also place the
receiver in your pocket.
• When sound is received, vibrations
begin and variable light display
lights on receiver.
• To turn off vibrations, press
vibrations button. Vibrations
ready indicator turns off.
• If you experience interference
(vibration) when it is obvious
that no sound is transmitting
while using one channel setting,
switch both units to other channel.
Selecting a channel is usually a
one time adjustment.
5
Power/Volume
Dial
Vibrations
Ready
Indicator
Vibrations
Button
Advertisement
