LG L177WSB-PF User Manual page 15

On Screen Display(OSD) Selection and Adjustment
Main menu
SETUP
S E T U P
S E T U P
MENU : Exit
: Adjust
: Adjust
SET : Select another sub-menu
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled only when
the input signal is an analog signal.
Sub menu
To choose the language in which the
LANGUAGE
control names are displayed.
OSD To adjust position of the OSD window
on the screen.
POSITION
If the output of the video card is different
WHITE
BALANCE
the required specifications, the color
level may deteriorate due to video
signal distortion. Using this function, the
signal level is adjusted to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors are present in the screen.
Use this function to set the power
POWER
INDICATOR
indicator on the front side of the monitor
to ON or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.
4:3 IN WIDE To select the image size of the screen.
WIDE
* 4:3 : Depending on the input video signal ratio,
it is automatically changed to an optimized screen
ratio. (The 1280x1024 input signal is changed
to 5:4 ratio and 1024x768 to 4:3.)
Resolution
1280x1024
1152x864
1024x768
800x600
640x480
720x480
❈ The input signal which the 4:3 IN WIDE does not support '4:3'
is the following
FACTORY
Restore all factory default settings except
"LANGUAGE."
RESET
Press the
A14
Description
4:3
Screen ratio
5 : 4
4 : 3
4 : 3
4 : 3
4 : 3
3 : 2
720x400,1280x768,1360x768,1440x900.
@ @ f
@ @ f
@ @ f
@ @ f
, button to reset immediately.