Operating Instruction; Parts And Service Information - 6K Products DH0629 24G36 Operation And Parts Manual

Operating Instructions
Before, and periodically during, operation you must check the bar oil level and chain tension. We recommend using
a good quality bar oil of the correct viscosity for your areas operating temperatures. Because of the wide
temperature range between winter and summer two different viscosity oils may be required. Tension the chain as
described on page 7. The log being cut must be clamped prior to sawing. Lowering the saw bar will allow the selector
valve to shift starting the saw chain and pumping bar oil. Returning the saw to the up stop will stop the saw chain
and reset the bar oil pump.

Parts and Service Information

For parts and service contact 6K Products. Our hours of operation are 8:00 AM to 4:30 PM, Monday through Friday,
Pacific Time excluding holidays.
Phone: 360-264-2141
Fax: 360-264-5105
Email ed@6kproducts.com
Mail and shipping address:
6K Products
1006 143 rd Ave. S.E.
Tenino, WA 98589
10