Table of Contents
Advertisement
Chapter 2
Installing the Motherboard
2-1. Safety Precautions
Follow these safety precautions when installing the motherboard:
•
Wear a grounding strap attached to a grounded device to avoid damage
from static electricity.
•
Discharge static electricity by touching the metal case of a safely grounded
object before working on the motherboard.
•
Leave components in the static-proof bags.
•
Always remove the AC power by unplugging the power cord from the power
outlet before installing or removing the motherboard or other hardware
components.
2-2. Installing the motherboard in a Chassis
This motherboard carries a Micro ATX form factor of 244 x 220 mm. Choose a chassis
that accommodates this from factor. Make sure that the I/O template in the chassis
matches the I/O ports installed on the rear edge of the motherboard. Most system
chassis have mounting brackets installed in the chassis, which corresponds to the
holes in the motherboard. Place the motherboard over the mounting brackets and
secure the motherboard onto the mounting brackets with screws.
Do not over-tighten the screws as this can stress the motherboard.
Z97M-PK USER MANUAL
7
Advertisement
Table of Contents
