Connecting With The Pc - LG IPS226V Owner's Manual

Connecting the Display

Connecting with the PC

1.
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
2.
Connect signal input cable
of the signal cable.
A
Connect DVI-D(Digital signal) Cable
B Connect D-sub(Analog signal) Cable
Connect HDMI Cable
C
AV equipment
(Set-Top Box, DVD, Video,
Video Game Console)
* HDMI is optimized on the AV equipment.
* Not supported PC
Wall-outlet type
Wall-outlet type
1
and power cord
OR
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may
differ from the view as shown.
2
in order, then tighten the screw
When using a D-Sub signal input cable connector
for Macintosh
Mac adapter : For Apple Macintosh use, a
separate plug adapter is needed to change the
15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin 2
row connector.
7
Connect the signal
input cable and tighten
it up by turning in the
direction of the arrow
as shown in the figure.
Headphone/Earphone Input