Mounting On A Table - LG IPS225V-BN Owner's Manual

Mounting on a table

1
Lift and tilt the Monitor set into its upright
position on a table.
Leave a 10 cm (minimum) space from the wall
for proper ventilation.
10 cm
10 cm
2
Connect the Power Cord to a wall outlet.
3
Press (Power) button on the front switch
panel to turn the power on.
CAUTION
Unplug the power cord before moving the
Monitor to another location. Otherwise electric
shock may occur.
When you adjust the angle, do not hold the
bottom of the Monitor set frame as shown on
the following illustration, as may injure your
fingers.
10 cm
10 cm
Do not touch or press the screen when
adjusting the angle of the monitor.
Tilt from +15 to -5 degrees up or down to adjust
the angle of the Monitor set to suit your view.
ASSEMBLING AND PREPARING
WARNING
NOTE
- 5 15
Front
7
Rear