LG E2350V-WN User Manual page 14

Control Panel Functions
AUTO Button
INPUT Button
(SOURCE Hot key)
EXIT Button
Power Button &
Power Indicator
Light Sensor
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO button before entering the On Screen
Display(OSD). (Only Analog Mode)
This will automatically adjust your display image to
the ideal settings for the current screen resolution
size (display mode).
The best display mode is
E2250V/E2350V : 1920 x 1080
Use this button to select source from input.
When two input signals at least are connected, you can
select the input signal (D-SUB/DVI/HDMI) you want. When
only one signal is connected, it is automatically detected.
The default setting is D-Sub.
Exit the OSD(On Screen Display).
Use this button to turn the display on or off.
From front view,the power indicator stays purple if the
display is running properly (On Mode). If the display
is in Sleep Mode (Energy Saving), the power indicator
is blinking purple.
This is lens for light sensor detect outside luminance,
when setting AUTO BRIGHT ON.
13