Advertisement
FIRE TABLE SOFT COVER
COMPATIBLE WITH OUTLAND LIVING FIRE TABLE MODELS:
TICK
SERIES NAME
OUTLAND FIRE TABLE
SOFT COVER INSTALLATION GUIDE
1. Align Outland Living logo to the front and rear ends
of your Firetable. Align the corners of the soft cover to
the corners of the Firetable.
2. Pull two end corners over the tabletop frame,
ensuring they are square.
NOTE:
To provide extra slack for the following steps, tuck the
corners in between the tabletop and the top edge of
the end panel, as shown.
® Registered trademark of FMI Brands Inc.
The OUTLAND flame is a registered trademark of FMI Brands Inc.
MODEL NUMBERS
FMPPC2E, FMPPC2E-1, FMPPC2E-403
FMI BRANDS INC.
107 – 19052 26 Avenue | Surrey, B.C. Canada V3Z 3V7
Toll Free 1-888-514-1663 | Fax 1-888-797-9931
NUMÉRO DE PIÈCE 793
SERIES NUMBERS
400, 401, 403
1 PC
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for FMI Outland Living 400 Series
Summary of Contents for FMI Outland Living 400 Series
- Page 1 ® Registered trademark of FMI Brands Inc. The OUTLAND flame is a registered trademark of FMI Brands Inc. FMI BRANDS INC. 107 – 19052 26 Avenue | Surrey, B.C. Canada V3Z 3V7...
- Page 2 Fire Table Soft Cover SOFT COVER INSTALLATION GUIDE (CONTINUED) 3. Pull the third corner over the tabletop frame. 4. Pull the last corner over the tabletop frame. Realign the four corners as needed so that they are square on the tabletop. 5.
- Page 3 The Soft Cover is designed with a tapered fit so should be expected to be fairly tight - BUT, REST ASSURED, IT WILL GO ON. If you have problems putting the Soft Cover on the Fire Table note the rectangular alignment of the cover with the fire table;...
- Page 4 Simply call us at or send an email to info@outlandliving.com and we will answer all questions and/or concerns that you may have. We take pride in our products at FMI Brands Inc. and will strive to provide excellent customer service. www.outlandliving.com FMI BRANDS INC.
Need help?
Do you have a question about the Outland Living 400 Series and is the answer not in the manual?
Questions and answers