C -
WARNING:
–
Before any operation, disconnect the appliance
from the electric grid.
–
Do not clean the appliance while it is hot.
Enameled Burner Caps
The enameled burner caps must be washed with a
sponge and soapy water or with a light detergent.
WARNING:
–
Do not use abrasive or corrosive products.
–
Do not leave substances, such as lemon or tomato
juice, salt water, vinegar, coffee and milk on the
enameled surfaces for a long time.
Stainless Steel
The stainless steel parts should also be cleaned
with soapy water and then dried with a soft cloth.
WARNING:
–
Stainless steel can be stained if it remains in
contact with highly calcareous water or aggressive
detergents for an extended period of time.
–
Stainless Steel can also discolour if in contact with
excessive heat.
Cleaning
Burners and racks
These parts can be removed to make cleaning
easier.
The burners must be washed with a sponge and
soapy water or with a light detergent, wiped well
and placed in their housing perfectly.
After cleaning, check that the feeler of the safety
valve, start-up electrode and the flame-dividing
ducts are not clogged with soap or grime.
The racks can be washed in the dishwasher.
Gas taps
WARNING:
Lubrication of the gas taps must be carried out by
specialized personnel, exclusively.
In case of hardening or malfunctions in the gas
taps, apply to the Customer Service.
5