Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Greenleaf Corona Concepts The Buttercup
Summary of Contents for Greenleaf Corona Concepts The Buttercup
- Page 1 Corona Concepts presents The Buttercup All Wood Dollhouse Instructions and Assembly Guides...
- Page 2 Introduction Tips for success! In Short...Welcome to the exciting world of dollhouses and miniatures. Since the first tab and slot die-cut dollhouse 1. Save the kit box as a safe “next for the wood sheets until kits arrived on the scene in the mid 1970's, their design and all the parts have been removed from them.
- Page 3 Finishing Touches All painting, staining and wallpapering should be done prior to assembly. Finishing your dollhouse is only limited by your imagination. Paint, wallpaper, stain and stucco are only a few of the items you can be creative with. Wood fill and primer can be very helpful. Use the wood fill to smooth joints between tabs and slots and on corner seams.
- Page 4 Align front entry wall – (G). Assembly Instructions A) ASSEMBLY OF HOUSE STRUCTURE 1. R&P first floor (1), second floor (2), left side (3), right side (5), front left and right (6), front entry left (8), front entry right (9), front entry wall (7). Using tabs and slots, align left and right walls to first and second floors –...
- Page 5 C) ASSEMBLY OF WINDOWS AND WINDOW TRIM 1. R&P three interior window sashes (3,5,6) and three interior window casings (3,5,6). Remove three windows from plastic window sheet by cutting along the dotted lines with sharp scissors. With all 3 sashes face down, position plastic windows centered on the sashes –...
- Page 6 Align this entire piece over the front entry wall keeping edges flush – (G). 5. R&P three round exterior window casings (3,7). Remove three windows from plastic window sheet by cutting along the dotted lines with sharp scissors. With all 3 sashes face down, position plastic windows centered on the casings –...
- Page 7 Align square shaped gingerbreads centered above and 8. R&P bay window trim piece (6), bay round window casing below half round window – (G). (8), two star shaped gingerbread trims (6), and three bay window top trim (6). Remove windows from plastic window sheet by cutting along the dotted lines with sharp scissors.
- Page 8 roof pieces to tabs on bay side front – (G). D) ASSEMBLY OF ROOF 1. R&P front roof (4), back roof (9), left and right gable roofs (8), two gussets (3,5). Align front roof with slots on left and right sides – (G). Align slots on back roof to tabs on left and right sides –...
- Page 9 Position two matching gable trim to front and back roof wall openings – (G). on right and left side – (G). Position last gable trim to front entry gable – (G). Align right gable roof to front roof and entry front – (G). Align left gable roof to front roof and entry front –...
- Page 10 2. R&P chimney sides (2,9),chimney front and back (1,8), four chimney top trim pieces (6), four chimney flute pieces (6), chimney top (6). Align chimney sides to front and back – (G). Position assembly to opening on chimney top – (G) Position two smaller chimney trim pieces to chimney sides –...
- Page 11 – (G). Position window box fronts to sides and ben@greenleafdollhouses.com bottoms. Repeat for all three window boxes. Corona Concepts is a member of the Greenleaf Dollhouses Family E S T A B L I S H E D 1 9 4 7...
- Page 12 Corona Concepts presents The Buttercup All Wood Dollhouse Schematic Drawings...
- Page 16 All rights reserved These instructions were printed in New York State Illustrations provided by Ben Anderson ben@greenleafdollhouses.com Corona Concepts is a member of the Greenleaf Dollhouses Family E S T A B L I S H E D 1 9 4 7...
Need help?
Do you have a question about the Corona Concepts The Buttercup and is the answer not in the manual?
Questions and answers