Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for ML BT CTEMS Series
Summary of Contents for ML BT CTEMS Series
- Page 1 INSTALLATION & MAINTENANCE MANUAL BTxxCTEMS...
- Page 2 These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following product: BT9CTEMS / BT14CTEMS / BT20CTEMS...
-
Page 3: Installation
SAFETY This product must be installed in accordance with the latest edition of the IEE Wiring Regulations This product must be installed in accordance with the latest edition of the IEE Wiring Regulations • • (BS7671) and current Building Regulations. If in any doubt, consult a qualified electrician (BS7671) and current Building Regulations. - Page 4 pipes or electrical cables Feed the cable via the rubber grommet to retain IP rating, and secure the baseplate to the surface • • Connect the Live (brown), Emergency Live (L1) and Neutral (blue) to the terminals on the terminal block (see Fig.
- Page 5 g. 4 Reattach the diffuser by rotating clockwise • • If the batteries have been left in a discharged state for an extended period, we Switch on and check for correct operation, ensuring the green indicator LED is illuminated • recommend that one or more charge and discharge cycles are completed which should We recommend, on commissioning the installation, a minimum charge period of 24 hours before •...
-
Page 6: Dip Switch Settings
DIP SWITCH SETTINGS Detection area IP SWITCH LAYOUT DIP SWITCH SETTINGS Detection area Hold time Hold time This is the time period the lamp remains at 100% after no motion is dete... - Page 7 If this product should fail within its warranty period, it should be returned to the place of purchase for a free of charge replacement. ML Accessories does not accept responsibility for any installation costs associated with the replacement product. Your statutory rights are not affected. ML Accessories reserve the...
-
Page 8: Warranty
ML Accessories does not accept responsibility for any installation costs associated with the replacement product. Your statutory rights are not affected. ML... -
Page 9: Contact Details
• If the luminaire fails any of the above tests, please contact a qualified electrician Please note: the Switched Live should not be re-energised during the emergency test INTERNATIONAL CONTACT DETAILS ML Accessories Limited LU5 4LT www.mlaccessories.co.uk DCAUG21_V4... - Page 10 TEST RECORD SHEET SIGNED DATE INITIAL COMMISSIONING 3 HOUR TEST FIRST YEAR SECOND YEAR THIRD YEAR FOURTH YEAR FIFTH YEAR MONTH TEST SIGNED DATE SIGNED DATE SIGNED DATE SIGNED DATE SIGNED DATE FUNCTIONAL FUNCTIONAL FUNCTIONAL FUNCTIONAL FUNCTIONAL FUNCTIONAL FUNCTIONAL FUNCTIONAL FUNCTIONAL FUNCTIONAL FUNCTIONAL...
Need help?
Do you have a question about the BT CTEMS Series and is the answer not in the manual?
Questions and answers