poolstar FASTER User Manual
  1. Manuals
  2. Brands
  3. poolstar Manuals
  4. Swimming Pool Vacuum
  5. FASTER
  6. User manual

poolstar FASTER User Manual

Robot automatic pool cleaner
Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Table of Contents

WIT 400
Robot automatic pool cleaner
User manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FASTER and is the answer not in the manual?

Questions and answers

Related Manuals for poolstar FASTER

Summary of Contents for poolstar FASTER

  • Page 1 WIT 400 Robot automatic pool cleaner User manual...

  • Page 2: Safety Warnings And Instructions

    Safety warnings and instructions Before operation, please carefully read the manuals, to be sure it is understood, otherwise, it may cause serious damages. WARNING! Do not clean in new pools without firstly Keep away from children and pets. manual cleaning . Repair the vinyl first, when there is broken / Remove the cleaner before chemically damages .

  • Page 3: Installing The Cleaner

    Installing the cleaner STEP 1: Preparing your pool. 1.Manually remove very large debris from pool (ie. post storm, spring cleaning/pool opening situations). 2.Backwash your filter, skimmer baskets and pump basket. 3.make sure your chemical balance is correct. If not, now is the time to correct it .
  • Page 4 STEP 3: Connect with the cleaner. WIT 400 STEP 4: Cleaner into the water . Put the cleaner into the water, turn on your pump ,and make one hose connect with the regular valve, to pipe out the air from cleaner and hoses.
  • Page 5 STEP 5: Connecting to pump. 1.Make sure that the filtration pump is turned off. 2.If you are hooking into a skimmer, tightly press the Regulator Valve and the Hose Cone (valve adapter) end into the bottom of your skimmer (see image 1). 3.If you are hooking into a designated threaded suction Port/line then unscrew in the Vac Lock and insert the Regulator Valve (see image 2).

  • Page 6: Daily Maintenance

    1. Adjusting the Adjustable Regulator valve If the count is: RMP < 30 Increase Flow（+） RMP > 32 Increase Flow（-） 2. Adjusting suction flow: Adjust the amount of flow from the suction line/skimmer line to obtain the proper flow. Daily Maintenance WARNING! To avoid serious injury, make sure that the cleaner is disconnected from the bellows and turn off the water pump before starting operation.
  • Page 7 Remove Debris Turbine blade replacement The turbine blades must be placed in one Cylinder Ellipse direction of the turbine hub (as shown in the right figure) . Note: the cylindrical end of the blade is placed in the groove of the hub.

  • Page 8: Troubleshooting

    Disassemble or replace the wheels / tracks Troubleshooting: If you have problems with your cleaner, follow the troubleshooting steps below to restore performance. Note: turn off the filter pump before making any repairs. Problem Solution Cleaner doesn’t move or moves too slow Check wheel RPM.
  • Page 9 When you rotate the right wheel forward by hand, the Hub or right drive gear is worn out. Please contact your local dealer. right wheel will teeth jump The cleaner turns in circles, it won’t go straight at all. The internal drive is damaged. Please contact your local dealer. Make sure that the hose is not bent or coiled.

This manual is also suitable for:

Wit 400

Table of Contents