Maretron DCR100 User Manual page 18

DCR100 User's Manual
4: Bank Instance – This field identifies the particular switch bank to which this PGN
applies. Please refer to Section 2.5.1.1 for instructions on how to program the value
of this field.
5: Indicator Number – This field indicates the number of the channel for which current is
being reported. The value of this field can range from 1 to 6.
6: Relay Current – This field indicates the current flowing through the relay channel in
units of 0.1A.
7: Reserved – This field is reserved by Maretron; therefore, this field always contains a
value of 0xFFFF (the DCR100 sets all reserved bits to a logic 1).
Page A2 Appendix A – NMEA 2000 Interfacing Revision 1.1