Table of Contents
Advertisement
3. Assembling the Motor Housing, Down Rod, Coupling
Cover and Canopy
A.
Put the motor housing through the coupler and secure this with 3 screws
B. Remove the hanger ball from the down rod. Thread the wiring from the fan motor
through the down rod.
C. Put the down rod into the coupler and insert the bolt and locking pin. Lock the
down rod screw and cover the coupler with the coupling cover.
D. Put the canopy through the down rod. Place the hanging ball on top of the down
rod and secure it with a screw.
4. Connecting the Power Supply Wire
Installing your Appliance
For your convenience and to assist
in easy installation & cleaning, your
ceiling fan is connected with a quick
connect system. Simply connect the
male and female couplings.
Advertisement
Table of Contents
