LG RC9011B Use And Care Manual page 11

Condensing dryer
Hide thumbs Also See for RC9011B:
Table of Contents

Advertisement

O
perating Your Dryer
Please read before using your LG Dryer for the first time
After removing the packaging, please carry out the following checks to ensure the LG Dryer is
correctly installed and ready for use.
1. Check the dryer is well balanced by using a spirit level. If not, adjust the feet of the LG Dryer until
the machine is balanced.
2. Check the water container, condenser, control panel and drum to make sure everything is in place.
3. Set the machine to dry for 5 minutes to warm up the drum.
4. Open the door between loads the first few times you use the machine to allow any odours from the
interior of the LG Dryer to escape.
1. Turn the power on.
First, press the ''Power'' button. The indicator
light above the button will become illuminated
indicating that the machine is all set to run.
2. Open the door.
3. Check the lint filter, is clean
container and condenser.
The lint filter near the door, should be emptied
after or before drying operation.
Open the door and check if lint filter is cleaned.
If not, please clean it referring to page 15.
Also check if water container or condenser
need to be empted and cleaned for better
drying results.
4. Place laundry into the drum after
sorting.
The clothes should be sorted by fabric type and
dryness level and all the strings and belts of
clothes should be well tied and fixed before
being put into the drum.
It is desired that you push the laundry to the
back to keep it away from the door seal.
If not, the door seal and clothes may be
damaged.
Pull
Push
Glass Door
Opaque Door
Turn the
power on.
Open the
Door.
Check the
lint filter.
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rc9011aRc9011cRc9011a1Rc9011b1Rc9011c1

Table of Contents