easyFIND M30 Setup

Easyfind Set Up For M30/12 HDMI USB
1. Press MENU key
2. Press the down arrow twice to highlight the SYSTEM SETTING menu
3. Press the OK button
4. Now the Fist line titled SPRACHE is highlighted in yellow
5. Press OK
6. Press the left arrow twice so that ENGLISH appears selected
7. Press the EXIT button twice
8. Press the UP ARROW twice to navigate to the EDIT CHANNEL menu
9. Press the OK button
10. Now the Fist line titled TV CHANNEL LIST is highlighted in yellow
11. Press OK
12. Press the LEFT ARROW and scroll through until EASYFIND LNB
appears in the top selection
13. Now use the UP and DOWN ARROWS to highlight in yellow 0003 ASTRA 28.2E
14. Press OK
15. Press EXIT button 4 times to return to the NO SIGNAL screen
16. Now press the INFO button twice
17. The top line should read CHANNEL ASTRA 28.2E
18. Now press the RED (V.FMT) button
19. Your LNB will start to flash RED
20. Ideally, for good quality reception, the signal intensity should bearound 80%+ plus and the signal
quality 65%+
21. Now starting with the dish facing East move the dish slowly to the right at South east the LED
should change colour. Make small movements with the dish left and right and the right should
change from RED to AMBER, now all that is required is very small and slow movements of the dish
to change the light to GREEN