Advertisement
Important information!
As a result of individual, hand made threading, pine chips and shavings may
remain in the thread hole which could be driven into the screw hole by the inserted
screw. These holes are checked by us in all cases, but for security reasons, you should
also follow the following steps.
We ask you for this because if these chips and shavings get into the screw
hole, or, for any reason, even one screw gets stuck, the node may become
disassmeblable, hence the furniture may be useless!
If a screw gets stuck, never force it!
If this happens, please unscrew the screw and turn the opening of the bolt 180
degrees. If required, disassemble the node and check again the threads.
For checking, please follow the following steps:
All manuals and user guides at all-guides.com
Advertisement
