Advertisement
Quick Links
6700A Fan & Pump Station:
> ¼ HP motor – 120 Volts – 3.5 Amps 60hz, 1075rpm (FAN).
> .5 HP motor – 120 Volts – 7.4 Amps, 60hz, 1725rpm (PUMP)
> 10.9 Amps total – 1 dedicated 15A power supply required.
> .5 gpm pump @ 1725rpm
> Motor/pump combination supports 18 nozzles.
> Dual filtration 5 & 10 micron filter housing uses standard garden hose water
connection for easy hook up.
Advertisement
Related Manuals for J.E. Adams 6700A
Summary of Contents for J.E. Adams 6700A
- Page 1 6700A Fan & Pump Station: > ¼ HP motor – 120 Volts – 3.5 Amps 60hz, 1075rpm (FAN). > .5 HP motor – 120 Volts – 7.4 Amps, 60hz, 1725rpm (PUMP) > 10.9 Amps total – 1 dedicated 15A power supply required.
- Page 2 Connect the fan cord, finger tight, to the fan outlet near the top of the column. 2) Connect your water inlet hose (Not provided by J.E. ADAMS Industries, Ltd. to a potable water source capable of delivering at least 1/2 gallon per minute of water at a pressure not less than 20 Psig and not more than 125 Psig.
-
Page 3: Maintenance
Subsequent oil changes should occur after every 500 hours of operational time or seasonally, whichever comes first. d) Use 10 oz. CAT pump oil per change. J.E. ADAMS Industries, Ltd. Pn 6611B013. Do not fill above the center of the oil viewing glass. -
Page 4: Storage Procedure
Storage Procedure: 1) Disconnect the water hose from the unit inlet fitting. 2) Install the winterization adapter, J.E. Adams Pn 6687T001, on the water hose inlet fitting. 3) Connect a compressed air source to the winterization adapter. Do not use compressed air at more than 100 Psig. -
Page 5: Troubleshooting
A thermal relief valve will discharge water when the water temperature exceeds 140 F. This protects the pump from heat damage and is normal. Repair any other leaks as needed. For other problems please contact your dealer, or J.E. ADAMS Industries at (800) 553-8861...