Advertisement
Quick Links
Interface "QD"
Interface
Compatible with Bosch Solution & DAS DL and L series
Compatible with Bosch Solution
Unit 3 / 9 - 11 South Street Rydalmere NSW 2116
Unit 3 / 9
&
PM1048v3 3G / 4G
PM1048
Australia
Installer
Installer
Guide
RDCCO Pty Ltd
Telephone: 61 2 9352 1777
Email: support@permaconn.com
Radio Data Comms
Web site: www.permaconn.com
DAS DL and L series
Advertisement
Related Manuals for Permaconn QD
Summary of Contents for Permaconn QD
- Page 1 Interface Interface “QD” Compatible with Bosch Solution Compatible with Bosch Solution & DAS DL and L series DAS DL and L series & PM1048 PM1048v3 3G / 4G Australia Installer Installer Guide RDCCO Pty Ltd Unit 3 / 9 Unit 3 / 9 - 11 South Street Rydalmere NSW 2116 Telephone: 61 2 9352 1777 Email: support@permaconn.com...
- Page 2 Introduction Introduction to the The interface module “QD” works in conjunction with the PM1048, designed to communicate from the Alarm panel using Serial Data compatible with - EDM Bosch Solution 16 alarm panel. DAS: DL100, DL150, DL200, DL250, DL300, 100L, 150L, 208L, 250L, 300L.
- Page 3 IFM - “QD” interface The IFM - QD module is designed to operate with the PM1048 and provides Serial Data from the PM1048’s RX & TX terminals. The “QD” interface option MUST be selected on activation otherwise this module will not operate.
- Page 4 Liability ANY LIABILITY FOR CONSEQUENTIAL AND INCIDENTAL DAMAGES IS EXPRESSLY DISCLAIMED. RADIO DATA COMMS AND PERMACONN LIABILITY IN ALL EVENTS IS LIMITED TO, AND SHALL NOT EXCEED, THE PURCHASE PRICE PAID. While every effort has been taken to ensure the accuracy of this document, Radio Data Comms assumes no responsibility or liability for any errors or omissions.