USER MODE
40
MS 300_english.p65
USER MODE
In the user mode, you can arbitrarily change the settings of the
following features:
•
•
•
•
•
User mode setting
1. Press the AE key about 2 seconds.
2. Press the Brightness Adjustment key ( or ) to move the
3. Press the Print Number Setting key (+ or –) to select the set
4. Press the Clear key to difine the setting.
User mode setting functions
Power saver mode
When the MS300II has not been operated for a specified length of
time, the scanner switches into standby mode and stops project-
ing the image on the screen to save power consumption.
40
Power saver mode
Hi-speed scanning mode
Scanning resolution
Cleaning mode
Switching the operation modes (DMP mode/Scanner mode)
The LED of the AE key and the Print/Error display blink.
The power saving mode currently set will be displayed on the
Print/Error display.
blinking LED up to the point where a mode, of which settings
you want to change, is located.
Power saver mode
Hi-speed scanning mode
Scanning resolution
Cleaning mode
Switching the operation modes
(DMP mode/Scanner mode)
ting of each mode.
: Does not switch into the power saver mode.
: Switches into the power saver mode if not operated more
than 15 minutes. (set at the factory before shipping)
: Switches into the power saver mode if not operated more
than 60 minutes.
07.5.14, 10:14