Table of Contents
Advertisement
Creating and Sending E-mail
1
From the Standby screen, press .
The Smart menu will be displayed.
2
Using , choose [Mail] and press [Ｓｅｌｅｃｔ].
The Mail option screen will be displayed.
3
Using , choose [Ｅ−Ｍａｉｌ] and
press [Ｓｅｌｅｃｔ].
The E-mail menu will be displayed.
4
Using , choose [Ｃｒｅａｔｅ Ｎｅｗ] and
press [Ｓｅｌｅｃｔ].
5
Using , choose [Ｇｏ Ｔｏ Ａｄｄｒｅｓｓ Ｂｏｏｋ] and
press [Ｓｅｌｅｃｔ].
The Address Book list will be displayed.
6
Using , choose the person to whom you
wish to send an e-mail and press [Ｓｅｌｅｃｔ].
The Subject input screen will be displayed.
49
7
Enter the Subject and press [Ｃｏｍｐｌｅｔｅ].
The Body input screen will be displayed.
● T h e S u b j e c t m a y b e u p t o 5 0 d o u b l e - w i d t h
characters long (100 single-width).
8
Enter the message and press [Ｃｏｍｐｌｅｔｅ].
The Send E-mail screen will be displayed.
●By pressing [Edit] you can edit any details.
●By pressing [Save], the message will be saved in
the Outbox.
9
Press [Ｓｅｎｄ].
The Select Send Method screen will be
displayed.
10
Using , choose [Ｓｅｎｄ] and press [Ｓｅｌｅｃｔ].
The e-mail will be sent.
●Once the e-mail has been sent, it will be saved in
the Outbox.
●From the Standby screen, press to display the Mail option screen.
●You may attach one attachment of up to 500KB.
●You may not attach data that is copyright.
●In Smart Mode, you can send one e-mail to one person. But, if you choose to
send e-mail from the Pair function, you can choose [Ａｌｌ Ｓｅｎｄ] and send to
all those listed as Pair Partners.
50
Advertisement
Table of Contents
