Page 1
ATTACH YOUR SAVE THESE RECEIPT HERE INSTRUCTIONS FOR FUTURE REFERENCE. Keep a copy of your proof of purchase needed if you need to contact Purchase Date: Before returning to your retailer, our exceptional customer service is available. 866 985 7877 07312020...
PART DESCRIPTION QUANTITY HARDWARE CONTENTS Qty: TIP: Assembly of this item involves Mortise and Tenon Joints. A Mortise is a notch or hole in a piece of wood designed to receive a Tenon of corresponding dimensions. NOTE: Assemble in a clear area on a spacious, nonabrasive surface such as a carpet or blanket. Do NOT over-tighten hardware, or you risk stressing or cracking the wood.
Page 4
— — Side gently temporarily secure, but not fully tightened. curved cross bars back has flat cross legs. I finger- holes near the front ends of the side/edge pieces and insert a Bolt...
Page 5
tenons mortis Finger- tighten each Bolt. carefully turn the bench upside-down. Locate the hole near the Proceed to fully tighten all installed hardware, being careful not to over-tighten.