Toshiba MML-AP0074NH-E Owner's Manual page 19

Indoor unit
Hide thumbs Also See for MML-AP0074NH-E:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Q Timer operation
Use the wired remote controller for timer setting if it is
also in use.
ON timer and OFF timer
PRESET
QUIET
SWING
FIX
TIMER
ON
SLEEP
CHK
Setting TIMER
1
ON/OFF TIMER button (
Press the ON or OFF TIMER buttons as required.
• The previous timer setting is displayed and fl ashes
along with ON/OFF timer display.
Set the timer to the desired time.
Each press of the TIMER button changes the time in
ten minute steps.
Pressing the TIMER button continually changes the
time in one hour step.
2
SET
button
SET
Press the SET
SET
The timer time is indicated and the timer starts.
Cancelling TIMER
3
CLR
button
CLR
Press the CLR
CLR
• When you select the timer operation, the remote
controller automatically transmits the timer signal
to the indoor unit at the specifi ed time. Therefore,
keep the remote controller in a location where it
can transmit the signal to the indoor unit properly.
Otherwise, the time lag of up to 15 minutes will
occur.
• If you do not press the SET
seconds after setting the time, the setting will be
cancelled.
1112750104.indb 17
FAN
TEMP
MODE
COMFORT
SLEEP
Hi-POWER
1
3
CLR
OFF
2
SET
FILTER
CLOCK
or
)
ON
OFF
button to set the timer.
button to cancel the timer setting.
CAUTION
button within 30
SET
Once you select the timer operation mode, the settings
are saved in the remote controller.
Thereafter, the air conditioner will start operating under
the same conditions when you simply press the ON/OFF
button of the remote controller.
If the clock display is fl ashing, you cannot set the timer.
Follow the instructions in the section "SETTING THE
CLOCK" and then set the timer.
Combined timer (Setting both ON and OFF
timers simultaneously)
OFF timer —> ON timer
(Operation —> Stop —> Operation)
This feature is useful when you want to stop the air
conditioner after you go to sleep, and start it again in the
morning when you wake up or you return home.
Example :
To stop the air conditioner and start it again next morning.
Operation
9
Setting combined TIMER
1. Press the OFF TIMER
timer.
2. Press the ON TIMER
3. Press the SET
button.
SET
ON timer —> OFF timer
(Stop —> Operation —> Stop)
You can use this setting to start the air conditioner when
you wake up and stop it when you leave the house.
Example :
To start the air conditioner next morning and stop it.
Stop
9
Setting combined TIMER
1. Press the ON TIMER
2. Press the OFF TIMER
timer.
3. Press the SET
button.
SET
• Either ON or OFF timer function which is closer to the
current time, is activated fi rst.
• If the same time is set for both ON and OFF timers, no
timer operation is performed.
Also, the air conditioner may stop operating.
– 17 –
Owner's Manual
Operation again
Stop
button to adjust the OFF
OFF
button to adjust the ON timer.
ON
Operation
Stop
button to adjust the ON timer.
ON
button to adjust the OFF
OFF
12/8/2559 BE 5:07 PM
EN
17-EN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents