Table of Contents
Advertisement
INSTALLATION
Remote Battery Installation
Insert x3 AA batteries, paying careful attention to the polarity symbols (+ / -).
Note: When the controller battery is low, the controller will emit a 'beep-beep' sound with
flashing light. Ensure to land the drone safely and replace the batteries.
Drone Battery
1.
Connect the USB cable to a USB outlet:
To charge the device, connect the battery plug to
the USB charging cable, and insert it into a
computer or compatible USB adapter. The RED
indicator light will turn OFF during charging and
will turn ON once battery has fully charged. Do
not leave the battery on charge once fully
charged.
•
Charging time is 100-120mins.
•
Flight time on a full charge is
approximately 6.5mins.
2.
Connecting the drone power supply:
Put the charged battery into the battery holder on the drone and then place the
battery plug into the drone's power supply. Once connected, the drone lights will
turn ON.
Switch
Advertisement
Table of Contents
