Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for PLDT GCE6256
Summary of Contents for PLDT GCE6256
- Page 1 GCE6256 Caller ID Phone User Manual...
-
Page 2: Safety Instruction
INTRODUCTION This manual will help you familiarize with the features of your telset unit. We suggest that you carefully read this manual before using the phone. SAFETY INSTRUCTION When using your telephone equipment, the following basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons: 1. -
Page 3: Location Description
LOCATION DESCRIPTION... -
Page 4: Get Started
GET STARTED The unit requires 3×1.5V AAA batteries, the time and date will only be displayed on the LCD after the batteries are inserted. Insert one end of the line cord (RJ11) to the line jack of the telephone base and other end to the wall outlet of exchange. -
Page 5: Setting Local Area Code
Redial function When dialing out a number but the line is busy, Press RD, the dialed number will be dialed out again. REVIEWE, CALL BACK AND DELETE INCOMING CALL Review Incoming Call 1. While on on-hook or off-hook state. 2. Press ▲ or ▼ key to review the incoming calls number. 3. -
Page 6: Maintenance
5. Unit will save and quit after 12 seconds. Note: If the local area code has only 1 digit, the last digit can be left as “-”. After you set the local area code, the unit will auto-filter the area code of an incoming call number if it has the same first several digits as the local area code. -
Page 7: Troubleshooting
TROUBLE SHOOTING 1. Check if the telephone line cord (RJ 11) is connected correctly. Unit does not ring 2. Check if the handset is placed correctly on “on-hook” state. when called. 3. Check if the ring volume switch selected is in “OFF” level. 4.