Download Print this page

NSS Enterprises POWERWAND 400 Parts List & Operation Manual

16” power head

Advertisement

Quick Links

PARTS LIST & OPERATION MANUAL
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Failure to observe these instructions can cause personal
injury to machine operator or bystanders.
WARNING: This product contains a chemical known to the state of California to cause
cancer and birth defects or other reproductive harm.
FOR SAFETY:
NEVER attempt to operate machine unless you have been trained in its operation. 
The PowerHead is designed for DRY pickup only.  DO NOT use on wet surfaces or for wet pickup. 
STORE INDOORS 
NEVER operate machine with a cut, abraded or taped cord. 
NEVER operate machine with a broken grounding blade on the plug. 
ALWAYS replace entire cord when cord or plug is damaged in any manner.  See page 2 for Wiring Diagram. 
NEVER handle machine, cord or plug with wet hands. 
NEVER drop or insert any object into any machine opening. 
ALWAYS keep face, fingers, hair or any body part, or loose clothing away from any machine opening or moving 
part, such as the rotating brush opening. 
NEVER attempt to service or perform maintenance functions while machine is plugged into electrical outlet. 
NEVER leave machine unattended when plugged in.  Unplug machine from electrical outlet when not in use. 
ALWAYS turn machine off before unplugging from electrical outlet. 
NEVER operate machine in the presence of flammable or combustible liquid or fumes. 
WARNING: Failure to observe these instructions can cause machine damage and/or
personal injury to machine operator or bystanders.
When any electrical motor, switch, cord or plug service
is required, maintenance should only be done by an
authorized service station, an electrician or other
qualified persons.
Never operate machine if it is not working properly, if it
has been dropped, damaged, exposed to weather, or
dropped into water. Return machine to service center
for examination and repair.
Never operate machine with any air opening blocked.
Keep all air openings free of dust, lint, hair and the like.
Do not operate vacuum source without dustbag and/or
filters in place.
 
16" POWERHEAD 
READ AND UNDERSTAND ALL INSTRUCTIONS
BEFORE OPERATING OR SERVICING MACHINE.
THIS MACHINE IS INTENDED FOR COMMERCIAL USE ONLY.
Always store machine indoors. Protect from rain or
snow. Never spray top of machine with liquids.
Do not pull or carry machine by electrical supply cord,
use cord as a handle, close door on cord, pull cord
around sharp edges or corners or expose to heated
surfaces.
Never disconnect plug by pulling on cord. To
disconnect from outlet grasp the plug, not the cord.
Always unplug vacuum source before connecting or
disconnecting this motorized brush attachment.
Never run this motorized attachment over power cord.

Advertisement

loading
Need help?

Need help?

Do you have a question about the POWERWAND 400 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for NSS Enterprises POWERWAND 400

  • Page 1 PARTS LIST & OPERATION MANUAL 16” POWERHEAD  IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE OPERATING OR SERVICING MACHINE. THIS MACHINE IS INTENDED FOR COMMERCIAL USE ONLY. WARNING: Failure to observe these instructions can cause personal injury to machine operator or bystanders. WARNING: This product contains a chemical known to the state of California to cause cancer and birth defects or other reproductive harm.
  • Page 2: Operation

    READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE OPERATING OR SERVICING MACHINE. THIS MACHINE IS INTENDED FOR COMMERCIAL USE ONLY.           WIRING DIAGRAM 16” POWER HEAD  Refer to the Operating Manual of your vacuum cleaner  for additional safety precautions.    Included will be instructions on cord and plug safety  procedures, wiring diagrams including grounding  procedures and routine maintenance requirements.  WARNING! When any electrical motor, switch, cord or plug service is required, maintenance should  only be done by an authorized service station, an electrician or other qualified persons.    16” Power Head Assembly and Operation Instructions    ASSEMBLY  OPERATION      Your NSS 16” Power Head is assembled for operation  Ensure switch of the vacuum source is in the OFF  except for installation of the tube handle and  position.  Attach cord of the Power Head to electric  attachment of a vacuum hose. ...
  • Page 3: Maintenance

    16” Power Head Maintenance Instructions  WARNING!   Do not attempt maintenance or repairs before disconnecting cord from electrical power  source.    MAINTENANCE  After 500 hours of running time, check vacuum    motor carbon brush wear.  When carbon brushes  Lubrication – The motor has sealed bearings which  and copper on commutator are worn, return to  require no further lubrication.  Casters and wheels  authorized NSS service station for repair.  should be oiled as required.      Belt & Brush  Current – Machine should be run only on voltage    specified on name plate.  a) Unplug power head from the vacuum source.    b) With Phillips head screwdriver, remove 4 screws  Hose – should be removed from machine after each  holding #25 bottom plastic cover into position.  use.  The tube handle should be removed from hose.   c) Pull out brush on the opposite end of belt until  It should then be laid in a loose coil or hung over  brush, bearing, and bearing block are removed  several pegs on the wall to remove the strain on it.  from brush housing.  Pull brush and remaining    bearing until brush pulls free from machine.   Cord  Remove strings and hair from brush and bearing    shaft.  Replace brush and bearings, if necessary;  a) Unplug power head from the vacuum source. ...
  • Page 4 16” POWERWAND 400 ITEM  PART NO.  DESCRIPTION  QTY    1601604  16” POWER HEAD 400 – 115 VOLT  1  1  1694001  TOP MOTOR COVER  1  N/S  ‐‐‐‐‐‐‐  #8‐18 X 1/2 PAN HEAD SCREW  3  N/S  ‐‐‐‐‐‐‐  #8‐18 X 5/8 PAN HEAD SCREW  1  2  1694051  MICRO SWITCH  1  3  1694041  SWITCH COVER PLATE  1  4  ‐‐‐‐‐‐‐  #4‐24 X 1 PAN HEAD SCREW  1  5  1694061  TERMINAL BLOCK WITH WIRES  1  6 ...
  • Page 5 16” POWERWAND 400 5   ...
  • Page 6 6   ...
  • Page 7 7   ...
  • Page 8   NSS ® Enterprises, Inc. 3115 Frenchmens Road, Toledo, Ohio 43607   PHONE (419) 531-2121 FAX (419) 531-3761 NSS ® Enterprises, Inc. European Distribution Centre Unit II, Pinfold Trading Estate * 55 Nottingham Road STAPLEFORD, NOTTINGHAM NG9 8AD ENGLAND U.K. PHONE: (44) 0115 939 1568 * FAX: (44) 0115 949 0615 NSS Asia Limited Shanghai 501 LiYuan Road, Building A7, Suite 7112...

This manual is also suitable for:

1601604