LG HR400 Manual page 40

HR407M-P_BGBRLLK_ENG 8/9/04
1080p Display Mode
When the resolution is set to 1080p, select [24Hz] for smooth presentation
of film material (1080/24p) with a HDMI-equipped display compatible with
1080/24p input.
Notes:
• When you select [24Hz], you may experience some picture disturbance
when the video switches video and film material. In this case, select
[50Hz].
• Even when [1080p Display Mode] is set to [24Hz], if your TV is not
compatible with 1080/24p, the actual frame frequency of the video
output will be 50Hz or 60Hz to match the video source format.
• When the 1080p/24Hz video source is outputted via HDMI connection,
the SCART OUT and COMPONENT VIDEO OUT will not output any
video signal.
HDMI Color Setting
Select the type of output from the HDMI OUT jack. For this setting, please
refer to the manuals of your display device.
[YCbCr] – Select when connecting to a HDMI display device.
[RGB] – Select when connecting to a RGB display device.
Note:
When you connect the HDMI OUT jack to DVI display device, the [HDMI
Color Setting] will automatically switch to [RGB].
Analog Output
Select an option according to the TV connection type.
[YPbPr] – When your TV is connected to the COMPONENT OUT
jacks on the unit.
[RGB] – When your TV is connected to the SCART OUT (RGB signal)
jack on the unit.
Notes:
• HDMI cable is connected, the menu screen is disabled.
• When Analog output is set to RGB, press RESOLUTION to change the
set to YPbPr.
40
4:49 AM Page 40
[LANGUAGE] Menu
Display Menu
Select a language for the [Setup] menu and on-screen display.
Disc Menu / Disc Audio / Disc Subtitle
Select the language you prefer for the audio track (disc audio), subtitles,
and the disc menu.
[Original] – Refers to the original language in which the disc was
recorded.
[Other] – Press OK ( ) to select another language. Use number but-
tons then OK ( ) to enter the corresponding 4-digit number according
to the language code list on page 62.
[Off] (for Disc Subtitle) – Turn off Subtitle.
Note:
Depending on the disc, your language setting may not work for some
discs.