Step 3: Preparing For The Installation Of The Tv - Sony SU-FL300L Instructions (SU-FL300M & SU-FL300L TV Stands) Instructions Manual

5
Attach the Glass Shelf.
1 Fully insert the Glass Shelf into the Rear Pillar until
it touches the Rear Pillar.
Note
Attach the Glass Shelf to the TV Stand with the Caution label
at the front right, as shown in the illustration.
2 Tighten the four screws on the Side Pillars to secure
the Glass Shelf and the TV Stand.
8
(US)
1
Caution label
Glass Shelf
2
Step 3:
Preparing for the
installation of the TV
Attach the sleeves to the Top
Board.
Insert the sleeves of the two supplied screws (+K4 ×
20) into the two front-most holes, then secure with the
screws.
Note
The other two rear-most holes of the Top Board are not used.
Paste the supplied paper
template on the Top Board.
1 Choose the paper template of your TV size from the
supplied paper templates and align the right corner
edges of the paper template with the right corner of
the Top Board.
2 Tape the paper template to the Top Board with the
supplied tape.
Paper template
Screw
(+K4 × 20)
+
Sleeve
Check your TV size.
Tape