C A U T I O N
Servicing the HP 83447A
Replacement Procedures
Replacing the RF cable
or the RF connector
overtighten.
N O T E
Replacing the RF cable or the RF connector may cause the trigger receiver to no longer meet the
specications and characteristics. (Refer to Table 1-1.) The RF cable and RF connector must be
replaced
to minimize the risk of the trigger receiver failing specications. To be sure it does
carefully
meet specications, you should return the trigger receiver to Hewlett-Packard for recalibration.
Table 4-7. Torque Values
Description
Tool Size
Do not
Torque