Advertisement
Important
Notice
Don't control RUN/STOP by power switch(SW1) immediately but using SW2. Avoid powering on and
rotating at the same time.
Two parts speed switching will be affected by SS and SD.
It can rotate oppositely in a flash with Reversible Motor as 6R 8R 9R series.
It must be stopped before changing the rotating direction with Induction Motor as 6I 8I 9I series.
High frequency will rise the temperature, make temperature switch off and stop rotating, so it must upon 4 seconds
When using brake function.(RUN 2 seconds, STOP 2 seconds) The Motor shell must be below 90°C as considering
ventilation and heating reduction.
Motor output power
The brake is Electric brake. After braking for 0.5 second, it don't have holding torque. If you need holding torque
, you can choose Electromagnetic Brake Motor.
Don't use controller as open collector to control TE31/32 in RUN/STOP/BRAKE/INTERNAL-EXTERNAL to
control speed.
above 2 seconds
above 4 seconds
Please inquiry with local officer or distributor to choose product
T R O Y E N T E R P R I S E C O . , L T D
Made in Taiwan
www.troy.com.tw
Cycle
(RUN for 1 second and STOP for 1 second
(RUN for 2 seconds and STOP for 2 seconds
Responsibility of environment protection
We place important on spreading environment
protection. Each package can be recycled.
Please using litter dealing process and
recycling to replace the old product.
--- By your attending, we protect the earth together. ---
We won't inform individually if we promote
the product characteristics. Please inquiry with
each office. Thank you very much.
11
Advertisement
