INSTALLATION Step 1: Open the battery case and turn the power switch to “ON”. Insert the battery, ensuring to correctly align the positive and negative terminals. Step 2: Remove the USB receiver from the mouse.
Page 4
Step 3: Insert the receiver into your computer’s USB port. Note: It may take a few minutes for the mouse to be usable as required drivers may automatically install to facilitate usage.
IN THE BOX 1x Wireless 1x Nano 2x AA alkaline 1x Wireless keyboard User Guide mouse receiver battery TROUBLESHOOTING Check the battery. If it is drained, replace it. Disconnect and reconnect the USB dongle to establish a new connection. Move to mouse closer to the receiver if it is out of the optimum range. Reconnecting the USB dongle Insert the battery and turn on the power Press the left, middle, and right mouse buttons at the same time.
Page 8
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...