Gigabyte GA-P55A-UD3P User Manual page 91

Step 3: Step 3:
Press <Enter> under the Press <Enter> under the
want to use for the master drive and press <Space> on the hard drive you want to use for the recovery drive. want to use for the master drive and press <Space> on the hard drive you want to use for the recovery drive.
(Make sure the recovery drive has equal or larger capacity than the master drive.) Then press <Enter> to (Make sure the recovery drive has equal or larger capacity than the master drive.) Then press <Enter> to
conrm. (Figure 10) conrm. (Figure 10)
M M
R R
[ [
Step 4: Step 4:
Under Under Sync Sync, select
the data on the master drive will be automatically and continuously copied to the recovery drive when both the data on the master drive will be automatically and continuously copied to the recovery drive when both
hard drives are installed in hard drives are installed in
recovery drive manually using the Intel Rapid Storage Technology in the operating system. recovery drive manually using the Intel Rapid Storage Technology in the operating system.
allows users to restore the master drive to a allows users to restore the master drive to a
[ [
Step 5: Step 5:
Finally press <Enter> on the Finally press <Enter> on the
screen instructions to complete. screen instructions to complete.
Select Disks Select Disks item. In the
Intel(R) Rapid Storage Technology - option ROM - 9.5.0.1037 Intel(R) Rapid Storage Technology - option ROM - 9.5.0.1037
Copyright(C) 2003-09 Copyright(C) 2003-09
Port Port Drive Drive Model Model
0 0 ST3120026AS ST3120026AS
1 1 ST3120026AS ST3120026AS
Select Select 1 1 Master Master
Recovery: Copies data between a master and a recovery disk. Recovery: Copies data between a master and a recovery disk.
RAID10: Mirrors data and stripes the mirror. RAID10: Mirrors data and stripes the mirror.
[ [ hi hi ]-Prev/Next ]-Prev/Next
hi hi ]-Change ]-Change [TAB]-Next [TAB]-Next
, select Continuous Continuous or or On On Request
the system. the system.
Intel(R) Rapid Storage Technology - option ROM - 9.5.0.1037 Intel(R) Rapid Storage Technology - option ROM - 9.5.0.1037
Copyright(C) 2003-09 Copyright(C) 2003-09
Continuous: volume is updated automatically Continuous: volume is updated automatically
hi hi ]-Change ]-Change [TAB]-Next [TAB]-Next
Create Create Volume Volume item to begin creating the Recovery Volume and follow the on-
item. In the SELECT SELECT DISKS DISKS box, press <Tab> on the hard drive you
Intel Corporation. Intel Corporation. All Rights All Rights
[ CREATE VOLUME MENU ] [ CREATE VOLUME MENU ]
Name Name : : V V olume0 olume0
RAID RAID Level Level : : Recovery Recovery
Disks Disks : : Select Disks Select Disks
[ [ SELECT DISKS SELECT DISKS ] ]
Strip Strip Size Size : : 128KB 128KB
Capacity Capacity : : 223.6 223.6 GB GB
Serial Serial # # Size Size
Create Create V V olume olume
3JT354CP 3JT354CP 111.7GB 111.7GB
3JT329JX 3JT329JX 111.7GB 111.7GB
[ HELP ] [ HELP ]
Choose the RAID level: Choose the RAID level:
RAID0: Stripes data (performance). RAID0: Stripes data (performance).
RAID1: Mirrors data (redundancy). RAID1: Mirrors data (redundancy).
and and 1 1 Recovery Recovery disk disk to to create create
[TAB]-(M)aster [TAB]-(M)aster [SPACE]-(R)ecovery [SPACE]-(R)ecovery
RAID5: Stripes data and parity. RAID5: Stripes data and parity.
[ESC]-Pr [ESC]-Previous
Figure 10 Figure 10
Request (Figure 11). When set to (Figure 11). When set to
On Request On Request allows users to update data from allows users to update data from
previous state. previous state.
Intel Corporation. Intel Corporation. All Rights All Rights
[ CREATE VOLUME MENU ] [ CREATE VOLUME MENU ]
Name Name : : V V olume0 olume0
RAID RAID Level Level : : Recovery Recovery
Disks : Disks : Select Disks Select Disks
Strip Strip Size Size : : N/A N/A
Capacity Capacity : : 0.0 0.0 GB GB
Sync Sync : : Continuous Continuous
Create Create V V olume olume
[ HELP ] [ HELP ]
Select a sync option: Select a sync option:
On Request: volume is updated manually On Request: volume is updated manually
[ESC]-Pr [ESC]-Previous
Figure 11 Figure 11
item to begin creating the Recovery Volume and follow the on-
- - 9 9 1 1 - -
box, press <Tab> on the hard drive you
Reserved. Reserved.
Type/Status Type/Status
Non-RAID Non-RAID D Disk isk
Non-RAID Non-RAID D Disk isk
volume. volume.
[ENTER]-Done [ENTER]-Don e
evious Menu Menu [ENTER]-Select [ENTER]-S
Continuous, changes made to Continuous , changes made to
the master drive to the the master drive to the
Reserved. Reserved.
evious Menu Menu [ENTER]-Select [ENTER]-S
elect
On On Request Request also also
elect
A A p p p p e e n n d d i i x x