Advertisement
Quick Links
PREMIER COLLECTIONS
A
paired struts (2)
Lay the Kite
out like this:
Step 1:
First, layout the kite and the struts as shown, making sure that all
necessary pieces are accounted for as shown in diagram A.
Step 2:
Connect the two encased struts by aligning them within their sleeves
and pushing the two halves together. Snugly fasten the velcro "cap" at
the ends of both of assembled struts. (diagram B)
nock
velcro enclosures
assembly instructions
B
Connect the spines
(inside the sleeves as
shown here) by aligning
both halves and pushing
them together.
tightly fasten
velcro enclosure
Advertisement
Related Manuals for Premier Kites Tri-Odessey
Summary of Contents for Premier Kites Tri-Odessey
- Page 1 PREMIER COLLECTIONS assembly instructions nock paired struts (2) Lay the Kite out like this: velcro enclosures Step 1: First, layout the kite and the struts as shown, making sure that all necessary pieces are accounted for as shown in diagram A. Step 2: Connect the spines (inside the sleeves as...
- Page 2 -As the wind catches the kite, signal your friend to release it while you bring in the line with long steady pulls. -Slowly let out more line as the kite flies upward. RECOMMENDED LINE: 250 LB TEST LINE OPTIMUM WIND CONDITIONS FOR TRI-ODESSEY KITE BEAUFORT CALM...
Need help?
Do you have a question about the Tri-Odessey and is the answer not in the manual?
Questions and answers