ENGLISH
Quick Guide Setup
Linking Wireless Cameras
THIS PROCEDURE WILL HELP TO CONNECT
YOUR NEW WIRELESS CAMERAS TO THE NVR
Connect the new camera to the power
1
supply, then connect it to the NVR's
Ethernet port using a Ethernet cord.
NVR
Power Adapter
Network cable
Power Adapter
Camera
2
Press the right click in the NVR and
select the Video Manage option
In the Video Manage, select the
3
default protocol and press Refresh
to start the camera search
4
Wait for a moment until an IP address
appears with the N1 protocol
5
Press the Match Code button to add
the selected camera
6
Select Yes to continue with the
procedure
Select yes again to modify the
7
Camera's IP address so the camera
can link with the NVR Wirelessly
Wait a moment until a "Connect
8
Success" message appear in a list of
the added devices, and the camera
will work perfectly
You can then di s connect the Ethernet cord between the NVR
and camera, as the data transmi s si o n between the camera and
NVR has been successful wi r elessly. Please repeat the same
procedure for the rest of the cameras you want to li n k to your
NVR manually.
Need help?
Vi s i t our web site
www.logan-cam.com
Contact our technical Support team from our
help center
support.logan-cam.com